Dia•Com's
International Corporate Headquarters was specifically
designed and constructed for state-of-the-art molded elastomeric
diaphragm design and manufacturing. The 30,000 square
foot facility, completed during the spring of 1994, had
detailed planning and consideration given to material
flow, HVAC and electrical systems as well as future expansion.
Microprocessor-Controlled Production
Presses
Microprocessor-Controlled
Production Presses were designed specifically for the
production of fabric-reinforced and homogeneous elastomeric
diaphragms. Our new production presses are built with
high strength components. The microprocessors closely
control the vulcanization process, thus assuring precise,
repeatable control of the molding process. The result
is high quality, low cost diaphragm production. Dia•Com
utilizes unique compression and transfer molding processes
to maximize efficiencies and insure the dimensional integrity
of each part.
Dia.Com Has Been Certified to ISO/ TS 16949
Dia.Com's Quality Systems are certified to the ISO/ TS 16949:2002 Quality Management System, an International standard developed to supersede the QS-9000 Quality System. ISO/ TS 16949:2002 uses a process approach when developing, implementing, and improving the effectiveness of a quality management system, to enhance customer satisfaction by meeting customer requirements.
History
Dia•Com
is a leading international provider of innovative, cost-effective
molded diaphragm solutions critical to the operation of essential
systems and equipment in industrial, automotive, aerospace,
medical instrumentation, and food and water processing applications.
The company's reputation for excellence is based on superior
quality in the design, manufacture and application of its
high-performance, state-of-the-art, fabric-reinforced and
homogeneous elastomeric diaphragm seals.
The company was founded in 1983 as a supplier of custom and
standard diaphragm seals known for reliability and dependability.
Today, Dia•Com, with worldwide corporate headquarters
in Amherst, New Hampshire, focuses on forming strategic customer
partnerships critical to the development of unique, technologically
superior design solutions linked to its customers' success.
As an extension of its customers’ design teams, Dia•Com
offers a broad range of custom diaphragm solutions that are
“designed for manufacturing,” and as a result, are
more comprehensive, robust and cost-effective than competitive
products.
:
Added:
Jan 12, 2010 1:25 pm
Line Item 0001: DeZurik Eccentric Plug Valve with actuator retangular port, size: 8" (standard port), stainless steel bearings, welded-in Nickel seat (except rubber lined bodies), end connection: flanged, drilled to ANSI class 125/150, body material: cast iron, ASTM A 126, Class B. Packing: Acrylonitrile-Butadlene reinforces, multiple v-ring with external adjustment, -20 to 250 degree F. (-29 to 121 degree C). Plug facing: chloroprene; -20 to 180 degree F (-29 to 83 degree C). Act type: G-series gear with double acting cylinder operator, Pneumatic pumpcheck accessory; rpaid close; AWWA test 175 Psi direct pressure; Additional pump check accessories: Hydraulic damper cylinder; 1/2" copper tubing; valve opening speed adjustable from 15 to 30 sec., closing speed adjustable from 50 to 70 sec. with a rapid close time of 10 second upon power failure; standard 4-way solenoid, ASCO EF8344G74MO; 21CX4 limit switch; cylinder modified to meet AWWA C540 Specifications. PEC,8, F1, Cl, NBR, CR*GS-6-PC8, EPPR-TD7 Modified to meet AWWA C540 specLine Item 0002: Plug ITEM NUMBER 1044402Line Item 0003: Male Packing ITEM NUMBER 4055753Line Item 0004: Packing Ring ITEM NUMBER 1055767Line Item 0005: Female Packing ITEM NUMBER 1055782Line Item 0006: Bonnet Gasket ITEM NUMBER 1013505Line Item 0007: Thrust Bearing ITEM NUMBER 1013468Line Item 0008: Body Bearing ITEM NUMBER 1012801Line Item 0009: Bonnet Bearing ITEM NUMBER 1012804
:
M67001 MARINE CORPS BASE CAMP LEJEUNE - RCO Marine Corps Base Camp Lejeune, NC
